Toshiba 40RV700A - Picture Adjustments and Enhancements

21
Using the TV’s features (General)
Still Picture
• Press to freeze the picture.
Even if an image is frozen on the TV screen, the pictures
are running on the input source. Audio continues to be
output as well.
To return to a moving picture, press again.
(Movin g) (St ill)
Note:
If you use this function except for the purpose of
your private viewing and listening, it may infringe the
copyright protected by the copyright laws.
Picture Mode
You can adjust the best picture appearance by
selecting the preset value in picture mode based on the
programme category.
1 Press and use ◄ or ► to select PICTURE.
2 Press ▲ or ▼ to highlight Picture Mode and use ◄
or ► to select Dynamic, Standard, Movie, PC, or
User.
Note: The Store mode is available only when the Loca-
tion in SETUP menu is set to Store.
Picture Mode Standard
50
95
50
0
50
Brightness
Contrast
Colour
Tint
Sharpness
PICTURE
60Back Light
Picture Size
Colour Temperature
Advanced Video
Wide
Select Back Exit
EXITRETURN
Brightness, Contrast, and Colour
1 In the PICTURE menu, press ▲ or ▼ to select
Brightness, Contrast, or Colour.
2 Using ◄ or ► to adjust your preference.
Tint
Adjusts the picture tint.
1. In the PICTURE menu, press ▲ or ▼ to select Tint.
2. Using ◄ or ► to adjust your preference.
Note: This function does not work in PC mode.
Sharpness
This function increase or decrease the sharpness of
the picture. The picture shows the clear edge when you
increase the values.
1 In the PICTURE menu, press ▲ or ▼ to select
Sharpness.
2 Using ◄ or ► to adjust your preference.
Back Light
Adjusting the Back Light can improve the clarity of the
screen when viewing.
1 In the PICTURE menu, and press ▲ or ▼ to highlight
Back Light.
2 Using ◄ or ► to adjust your preference.
Picture Mode Standard
50
95
50
0
50
Brightness
Contrast
Colour
Tint
Sharpness
PICTURE
60Back Light
Picture Size
Colour Temperature
Advanced Video
Wide
Select Back Exit
EXIT
Adjust
OK RETURN
Colour Temperature
Colour Temperature increases the ‘warmth’ or ‘coolness’
of a picture by increasing the red or blue tint.
1 In the PICTURE menu, press ▲ or ▼ to highlight
Colour Temperature and press ► or to select.
Picture Mode User
50
95
50
0
50
Brightness
Contrast
Colour
Tint
Sharpness
PICTURE
60Back Light
Picture Size
Colour Temperature
Advanced Video
Wide
Select Back Exit
EXIT
Enter
OK RETURN
2 Using ◄ or ► to select Cool, Medium, Warm or
User to suit your preference.
Colour Temperature Medium
0
0
0
R Gain
G Gain
B Gain
Colour Temperature
Select Back Exit
EXITRETURN
Note: R/G/B Gain: Increase or decrease the red/green/
blue values in the picture.