32
Using the TV’s features (General)
Input Block
This function can disable the specific external input
signals.
1 Highlight the Parental in the SETUP menu, and
press ► or to select.
2 Enter the 4-digit password.
3 Use ▲ or ▼ to highlight the Input Block and press
► or to select.
Parental
Select Back Exit
EXIT
Enter
OK RETURN
Channel Block
Programme Block
Input Block
Change Password
Panel Lock
Off
Factory Default
4 Use ▲ or ▼ to highlight the input that you want to
disable and press to lock.
Panel Lock
You can lock the control buttons on your TV by using this
Panel Lock. When this function enables, the TV can be
controlled only by the remote control.
1 Highlight the Parental in the SETUP menu, and
press ► or to select.
2 Enter the 4-digit password.
3 Use ▲ or ▼ to highlight the Panel Lock and press
◄ or ► to switch the function On or Off.
Note: When the Panel Lock is set to “On”, TV can be
turned off by pressing the power keys on the TV or the
remote control, but can be turned on only by the remote
control.
Factory Default
Selecting Factory Default will reset all TV settings,
including stored channels, to their original factory values.
1 Highlight the Parental in the SETUP menu, and
press ► or to select.
2 Enter the 4-digit password.
3 Use ▲ or ▼ to highlight the Factory Default and
press ► or to select.
Note: After factory default is completed, the initial setup
screen will appear.
Programme Guide
The programme guide gives access to programme
details for all available channels.
Guide
1 Select the on-screen guide by pressing
GUIDE
, the
guide screen will appear highlighting details of the
programme and event currently being viewed. This
may take a few moments to appear.
2 Press ◄ or ► for information on other events
scheduled for the programme selected.
3 For details of other programmes currently available,
press ▲ and ▼ to scroll up and down the programme
list.
Note: In order for the recording operation to work
properly, the media recorder must be set to the same
time as the TV. Regarding the process for recording,
please refer to the owner's manual of the recording
equipment.
To Next Page
Loading...
