15
H. Manual Fine Tuning
Press V or U until better picture and sound
are obtained.
I. Signal Booster
If the receiving signal is weak/strong and
the picture is noisy, the picture may be
improved when using this function.
Press the V or U to turn the Signal Booster
On or O .
J. Label
Station labels appear under the programme
position display each time you turn on the
TV, select a channel, or press
.
To change or create station labels:
1) Press V or U repeatedly to select a
character for the rst space, then press Y
or Z.
(blank space)
2) Repeat step 1) to enter the rest of the
characters. If you would like a blank space
in the label name, you must choose a
blank space from the list of characters.
Press Q to store your settings.
Sorting positions
TV channels may be moved and stored to the
position of your choice.
1 From the SETUP menu, press V or U to select
Manual Tuning.
2 With the list of channels now showing, press V
or U to select the channel you want to move
and press Z.
1
Channel
C-02
C-04
C-05
C-07
C-12
S-17
S-19
C-09
2
3
4
5
6
7
8
ABCD
EFGH
IJKL
MNOP
Pos.
Manual Tuning
Label
3 Use V or U to move through the list to your
preferred position. As you do so, the other
channels will move to make room.
4 Press Y to store your move.
• Repeat as necessary, and then press EXIT.
Introduction / Getting started
Setting the Location
You can select either Home or Store mode. Home
is recommended for normal home use. Select Store
when using a TV for displaying in a shop, etc.
1 From the SETUP menu, press V or U to select
Location.
2 Press Y or Z to select Home or Store.
To Next Page
Loading...
