21
Using the TV’s features
2 Press V or U to select Digital Audio Output.
AV Connection
PC/HDMI 3 Audio
HDMI 3 Audio
Digital Audio Output
Digital
Auto
PC
Input Labeling
3 Press Y or Z to select Auto or PCM.
• Auto: This mode outputs Dolby Digital or
PCM to the digital audio output socket
providing it is being broadcast.
• PCM: Select this when a 2ch digital stereo
ampli er is connected to the TV. When
you select a Dolby Digital or MPEG
audio track, the sound is converted to
the PCM (2ch) format and output.
Other features settings
Setting the On Timer menu
The feature allows you to set the TV to turn on
automatically to a preset position or input.
1 From the APPLICATIONS menu, press V to
select On Timer, and then press Q.
2 Press V or U to select Enable On Timer, and
then press Y or Z to select On.
On Timer
Enable On Timer
Input
Volume
Time Until Power On
Position
30
00:10
TV
1
On
Done
3 Press V or U to go through the list adding the
details of the on timer by using the Number
buttons and Y or Z to make selections and
press Q.
Input: Select a video input source (TV, EXT 1,
EXT 2, HDMI 1, HDMI 2, HDMI 3, HDMI 4 or PC).
Position: Set the position that will be tuned
when the TV turns on.
Volume: Select the volume level that will be set
when the TV turns on.
Time Until Power On: Set the amount of
time from now until the TV turns on using the
Number buttons (maximum of 12 hours).
4 When all the details have been entered, select
Done and press Q to start the timer.
To cancel the On Timer
1 In the On Timer menu, select Enable On Timer.
2 Press Y or Z to select O , and then select
Done and press Q.
Setting the Sleep Timer
The Sleep Timer is especially useful if you want the
TV to turn itself o after a selected period of time.
1 From the APPLICATIONS menu, press V to
select Sleep Timer.
2 Press the Number buttons (0-9) to enter
the amount of time until the TV turns o .
Alternatively, press Y or Z to adjust the time in
blocks of 10 minutes up to 12 hours.
3 Press EXIT to start the timer.
To display the remaining Sleep Timer:
Press SLEEP.
To cancel the sleep time:
Press Y, Z or SLEEP until the time is set to
00:00.
Using the Auto Format
When the TV receives a true HDMI signal picture
and the Auto Format is On, it will automatically be
displayed in HDMI signal format, irrespective of the
TV’s previous setting.
1 From the Display Settings in the
PREFERENCES menu, press V or U to select
Auto Format.
Auto Format On
4:3 Stretch Off
Picture Position
PC Settings
Display Settings
2 Press Y or Z to select On or O .
Activating Blue Screen
When Blue Screen is set to On, the screen will turn
blue and the sound will be muted when no signal is
received.
1 From the PREFERENCES menu, press V or U to
until Blue Screen is selected.
2 Press Y or Z to select On or O .
Note:
Some external inputs may not mute the sound.
To Next Page
Loading...
