43
Network PIN Setup
1 From the Network Setup menu, press Q and
press V or U to select Network PIN Setup.
2 Press Q and press the Number buttons to
enter a 4-digit number. Con rm the code.
Note:
PIN code cannot be set to “0000”.
To change or delete your PIN code:
1 From the Network PIN Setup menu, press the
Number buttons to enter your 4-digit PIN code.
2 Select Change PIN or Delete PIN and press Q.
Note:
PIN code cannot be set to “0000”.
Using the software keyboard
You can enter text by using the Software Keyboard.
The Software Keyboard window will appear when
you press OK on a eld that accepts character input.
To enter text using the software keyboard:
1 Highlight the desired character on the on-
screen software keyboard.
2 Press Q.
3 Repeat steps 1 and 2 until you have entered all
desired text.
4 Press the BLUE button to close the software
keyboard and return to the previous screen.
Note:
If BACK is pressed, changes are not saved and the
software keyboard window is closed. The text will
remain as it was before starting the keyboard.
A BCDE FG
A a1@
AAA|
HIJKLMN
OPQRSTU
VWXYZ
Input operation on the remote control:
Button Description
OK Inputs the selected character.
0-9 Inputs the number directly.
V U Y Z
Moves the character highlight.
CC cc
Moves the cursor.
Z
Moves the cursor to the head of a
character string.
z
Moves the cursor to the end of a
character string.
RED Deletes 1 character to the left of the
cursor.
GREEN Cycles through upper case, lower
case, numbers, and symbols, if
available.
YELLOW Chooses an accented version of the
current letter, if applicable.
BLUE Saves changes and closes the
Software Keyboard window.
BACK Closes the Software Keyboard
window without saving changes.
Connecting your TV
To Next Page
Loading...
