33
Connecting your TV
Back connections
Connection example
VCR (Normal)
DVD video player
(with component
video outputs)
Set Top Box
or
Audio system
TV back view
or
• Before connecting any external equipment, turn
o all main power switches.
• The unauthorized recording of TV programmes,
DVDs, video tapes and other materials may
infringe upon the provisions of copyright law.
• The COMPONENT VIDEO INPUT consists of three
component video signals (Y, PB/CB, PR/CR) and
provides the best picture performance. These
terminals can only be used with the component
video compatible equipment e.g. DVD video
player, etc.
• If you connect to COMPONENT VIDEO for the
COMPONENT / VIDEO INPUT terminals, screen
display will appear changes to COMPONENT.
• Additional equipment and cables shown are not
supplied with this TV.
Note:
o (1) COMPONENT / VIDEO INPUT terminals
Standard video mode:
Use terminals Y, L and R.
Red
Yellow
White
Component video mode:
Use terminals Y, PB/CB, PR/CR, L and R.
Red
(Audio)
White GreenBlueRed
Connecting an audio system
You can enjoy high quality dynamic sound by
connecting the TV to an audio system.
Notes:
• DO NOT connect the DIGITAL AUDIO output
terminal to the AC-3 RF input of a Dolby Digital
Receiver with a built-in Dolby Digital decoder.
• Connect the DIGITAL AUDIO output terminal to the
OPTICAL input of a receiver or processor.
• Refer to the owner’s manual of the connected
equipment as well.
• When you connect the TV to other equipment, be
sure to turn o the power and unplug all of the
equipment from the wall outlet before making any
connections.
• The output sound of the TV has a wide dynamic
range. Be sure to adjust the audio ampli er’s volume
to a moderate listening level before turning on the
power. Otherwise, the speakers and your hearing
may be damaged by sudden high volume audio.
• Turn o the ampli er before you connect or
disconnect the TV’s power cord. If you leave the
ampli er power on, the speakers may be damaged.
Warning:
When you are connecting (via the DIGITAL AUDIO
output terminal) an AV decoder that does not have
Dolby Digital decoding function, be sure to set PCM
for Digital Output menu (- page 20). Otherwise,
the speakers and your hearing may be damaged by
sudden high volume audio.
To Next Page
Loading...
