37
Signal names for mini D-sub 15 pin connector
Pin assignment for RGB/PC terminal
Pin No. Signal name Pin No. Signal name
1R 9NC
2 G 10 Ground
3 B 11 NC
4 NC (not
connected)
12 NC
5 Ground 13 H-sync
6 Ground 14 V-sync
7 Ground 15 NC
8 Ground
Using the PC Settings
• First press until the video input mode list
appears on the screen, then press V or U and Q
in order to select the PC input mode (- page 29).
• This function may not be available for some signal
or if no signal is received.
• The optimum points of the Clock Phase
and Sampling Clock adjustments may be
incomprehensible according to the input signals.
Adjusting the picture position
1 From the Display Settings in the PREFERENCES
menu, press V or U to select PC Settings.
2 Press Q to display the PC Settings menu.
PC Settings
Horizontal Position
Vertical Position
Clock Phase
Sampling Clock
Reset
0
0
0
0
3 Press V or U to select an option you want to
adjust. Press Y or Z to adjust the settings as
required.
Adjusting the Clock Phase of the picture
If the Clock Phase, which synchronize the PC signal
and LCD display, is not optimized, the picture will
blur.
This function enables you to adjust Clock Phase
and display a clear picture.
Connecting your TV
1 From the PC Settings menu, press V or U to
select Clock Phase.
2 Press Y or Z to obtain a clear picture.
Adjusting the Sampling Clock
If the Sampling Clock does not match with the dot
clock frequency of the PC, blurred picture detail will
occur, or screen width will change, or drift patterns
in vertical lines may be apparent.
This function enables you to adjust it and optimize
the picture.
1 From the PC Settings menu, press V or U to
select Sampling Clock.
2 Press Y or Z to optimize the picture.
Resetting the PC Settings
The Reset function adjusts the PC Settings to the
factory settings.
1 From the PC Settings menu, press V or U to
select Reset.
2 Press Q.
Note:
When a PC is connected using HDMI none of these
function will be available.
Connecting a home network
The LAN port allows your Toshiba TV to connect to
your home network. You can use this revolutionary
home entertainment networking system to access
photo, video and audio les that are stored on a
DLNA CERTIFIED™ server and play/display them on
your TV .
Notes:
• If you connect to a shared-network outside
your home, please use the router, and use
DLNA CERTIFIED™ product in a private network
environment.
• If you use a Hub or switch to connect the TV to your
home network, you may not be able to use the
automatic setup and have to manually set up the
network address (- page 41).
• If you use a router with built-in DHCP functionality,
use the automatic setup. Manual setup may not
work.
• If you connect the TV and PC directly, use a crossover
LAN cable.
To Next Page
Loading...
