Toshiba 40VL20 Series - Setting the Colour System; Labeling Video Input Sources; Channel List; Teletext

30
Setting the Colour System
1 Press MENU, and then press Y or Z to display
the SETUP menu.
Menu Language
Auto Tuning
Manual Tuning
Colour System
Quick Setup
Software Upgrade
Location
Antenna
Software Licences
English
Auto
Home
SETUP
2 Press V or U to select Colour System, and
then press Y or Z to select Auto, PAL, SECAM,
NTSC 4.43 or NTSC 3.58.
3 Press Q to store your settings.
Notes:
• Con rm that Colour System is set to “Auto”. If not,
select “Auto” with Y or Z.
• This feature is available in Standard video
(composite) inputs mode.
Labeling video input sources
These input labels are shown in the input selector.
You can label video inputs according to the devices
you have connected to the TV.
1 From the PREFERENCES menu, press U or V
to select AV Connection and press Q.
2 Press V or U to select Input Labeling and
press Q.
Input
Label
--
--
--
--
--
--
--
Input Labeling
EXT 1
EXT 2
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
3 Press V or U to select the item you want to
label and press Y or Z to select --, Ampli er,
Cable, DVD, Game, PC, Recorder, Satellite or
VCR, or press the RED button to turn on the
skip.
4 Repeat step 3 for other video inputs.
Channel List
1 Press LIST. The Channel List will appear.
Channel List
1
2
3
4
5
6
7
8
2 Press V or U to select a channel, and then
press Q.
Teletext
This TV has a multi-page Teletext memory, which
takes a few moments to load and it o ers two
ways of viewing Teletext Auto and List which are
explained below.
Setting up the Teletext mode
To select a language for Teletext:
The language 1-4 option enables the display of
di erent language when using Teletext.
1 From the PREFERENCES menu, and then press
V or U to select Teletext Language.
2 Press Y or Z to select the required language.
• Language 1: English, German, Dutch,
Flemish, Russian, Bulgarian, Ukranian, Lettish,
Lithuanian, Czech, Slovak, Estonian
• Language 2: Polish, German, Dutch, Flemish,
Estonian, Lettish, Lithuanian, French, Serbian,
Croatian, Slovenian, Czech, Slovak, Rumanian
• Language 3: English, French, Hebrew, Turkish,
Arabic
• Language 4: English, French, Hebrew, Turkish,
Farsi (Iranian/Persian)
To select Teletext mode:
Select a channel position with the desired Teletext
service.
1 From PREFERENCES menu, press V or U to
select Teletext.
2 Press Y or Z to select Auto or List mode.
Notes:
• It may take a few moments for the multi-page
teletext memory to load.
• You must exit teletext mode in order to display the
main menu.
Using the TV’s features
4046VL20Series1En.indd30 2012/02/2814:44:58