20
Using the TV’s features
Adjusting the sound Balance
1 From the SOUND menu, press V or U to select
the Balance.
2 Press Y or Z to adjust the settings as desired.
Using the Advanced Sound Settings
Bass and Treble help to adjust the basic sound
quality.
Dynamic Bass Boost helps to emphasize the bass
sound. Please use this function in your favorite.
Voice Enhancement helps to emphasize
dialogue. It will be easier to hear voices over other
background audio.
1 From the SOUND menu, press V or U to select
Advanced Sound Settings and press Q.
Advanced Sound Settings
Bass
Treble
Voice Enhancement
On
Dynamic Bass Boost High
0
0
2 Press V or U to select Bass or Treble you
want to adjust and press Y or Z to adjust the
settings as desired.
Voice Enhancement : On or O .
Dynamic Bass Boost : Low, High or O .
Using the Stable Sound
The Stable sound function limits the highest volume
level to prevent extreme changes in volume when
the signal source changes (for example, to prevent
the sudden increase in volume that often happens
when a TV programme switches to a commercial).
1 From the SOUND menu, press V or U to select
Stable Sound.
2 Press Y or Z to select On or O .
Dynamic Range Control
This feature allows control of compression for digital
audio signal excluding those with MPEG-1 and
MPEG-2 audio.
1 From the SOUND menu, press V or U to select
Dynamic Range Control.
2 Press Y or Z to select On or O .
Setting the Digital Audio Output
1 From the PREFERENCES menu, press V or U to
select AV Connection and press Q.
Selecting the stereo programmes
1 When a stereo programme is received, d
Stereo appears.
10 ABCD Stereo
2 Press g to select the stereo/monaural mode.
d Stereo and e Mono appear cyclically on
the screen.
Stereo
Selecting the bilingual programmes
1 When a bilingual programme is received,
j Dual appears.
2 Press g to select the sound to be heard. The
sound di ers according to the transmission
system: NICAM or German stereo/bilingual
broadcast.
Display
Sound to be heard
NICAM
German stereo/
bilingual broadcast
j Dual 1
Sub I sound Main sound
J Dual 2
Sub II sound Sub sound
e Mono
Main sound —
Note:
These settings are not stored in the TV memory.
Selecting the monaural programmes
If sound distortion, interruptions or silence arises in
the low sound volume level, setting the eMono 2
mode will mitigate the problem.
1 When a monaural programme is received, e
Mono appears.
2 Press g to select a monaural mode that is
easy to hear. e Mono 1 and e Mono 2 appear
cyclically to the screen.
Note:
On some cases, the reception of stereo/bilingual
broadcasts may not be possible after switching on the
e Mono 2 mode.
To Next Page
Loading...
