9-15
T
ROUBLESHOOTING
1. Open the Control Panel, select the Mouse
icon and press Enter.
2. Click the Pointer Options tab.
3. Set the speed as instructed and click OK.
If problems persist, contact your dealer.
USB mouse
Problem Procedure
On-screen pointer The system might be busy. If the pointer is
does not respond to shaped as an hourglass, wait for it to resume
Touch Pad operation its normal shape and try again to move it.
Make sure the mouse is properly connected to
the USB port.
Double-clicking Try changing the double-click speed setting in the
does not work mouse control utility.
1. Open the Control Panel, select the Mouse
icon and press Enter.
2. Click the Buttons tab.
3. Set the double-click speed as instructed and
click OK.
The mouse pointer Try changing the speed setting in the mouse
moves too fast or control utility.
too slow
1. Open the Control Panel, select the Mouse
icon and press Enter.
2. Click the Pointer Options tab.
3. Set the speed as instructed and click OK.
Hardware and system checklist
To Next Page
Loading...
