User's Manual
TROUBLESHOOTING
9-20
You can also use the ATS0 command. Refer to
the online help files for Appendix D, S-registers.
If problems persist, contact your dealer.
LAN
Problem Procedure
Cannot access LAN Check for a firm cable connection between the
LAN jack and the LAN HUB.
Wake-up on LAN Make sure the AC adaptor is connected. The
does not work Wake-up on LAN function consumes power even
when the system is off.
If problems persist, consult your LAN administra-
tor.
Wireless LAN
If the following procedures do not restore LAN access, consult your LAN adminis-
trator. For more information on wireless communication, refer to Chapter 4, Operat-
ing Basics.
Problem Procedure
Cannot access Make sure the computer’s wireless
wireless LAN communication switch is set to on.
If problems persist, contact your LAN administra-
tor or dealer.
To Next Page
Loading...
