User's Manual
TROUBLESHOOTING
9-14
Infrared port
Refer also to the documentation for your IrDA compatible device and related
software.
Problem Procedure
Infrared devices do Make sure there is no obstruction blocking
not work as expected communication between the computer and the
target device.
If problems persist, contact your dealer.
Pointing device
If you are using a USB mouse, also refer to the USB section in this chapter and to
your mouse documentation.
Touch Pad
Problem Procedure
On-screen pointer The system might be busy. If the pointer is
does not respond to shaped as an hourglass, wait for it to resume
Touch Pad operation its normal shape and try again to move it.
Double-tapping Try changing the double-click speed setting in
does not work the mouse control utility.
1. Open the Control Panel, select the Mouse
icon and press Enter.
2. Click the Buttons tab.
3. Set the double-click speed as instructed and
click OK.
The mouse pointer Try changing the speed setting in the mouse
moves too fast or control utility.
too slow
To Next Page
Loading...
