Toshiba 5000 Series - CD;DVD Control and Digital Audio Control

O
PERATING
B
ASICS
4-9
CD/DVD control and Digital Audio control
The following chart describes CD/DVD control and Digital Audio control.
CD/DVD control Digital Audio control
Power is off If an audio CD is in the drive, Operating system starts,
and you press the system enters CD Player TOSHIBA Media Player
Play/Pause mode and operates as a starts and Digital Audio
stand-alone CD player. Data play begins.
If a DVD is in the drive, the
operating system starts
and the DVD Video player
starts.
CD player DVD-ROM drive power
mode and turns off.
you press
Mode Control
OS is running If an audio CD is in the drive, TOSHIBA Media Player
and you press TOSHIBA Media Player starts and Digital Audio
Play/Pause starts and CD audio play Data play begins.
begins.
If a DVD is in the drive, the
DVD Video player starts and
DVD Video play begins.
NOTE: To play Digital Audio Data, you must set the play list in the
TOSHIBA Media Player. The next time you play Digital Audio Data in
succession, the former play list will become active. If a CD was played the
previous time, then All Audio will be used.
CAUTION: Do not install or remove a memory module while the DVD-
ROM drive power is on. First turn off the power to the DVD-ROM drive.
Audio/video controls