User's Guide
D-4
APPENDIX D
S8 Comma pause time
This register sets the time, in seconds, that the modem must pause
when it encounters a comma (,) in the dial command string. In some
regions, S8 will set both wait before dialing and comma pause time.
Range: 0-255
Default: 2
Units: seconds
S11 DTMF dialing speed
This register determines the dialing speed which is prefixed for each
country/region.
Range: 50-255
Default: 95
Units: milliseconds
S12 Escape guard time
This register sets the value (in 20 ms increments) for the required
pause after the escape sequence (default 1 s).
Range: 0-255
Default: 50
Units: 20 milliseconds
S37 Dial line rate
S37 = 0 (default) maximum modem speed
S37 = 1 reserved
S37 = 2 1200/75 bps
S37 = 3 300 bps
S37 = 4 reserved
S37 = 5 1200 bps
S37 = 6 2400 bps
S37 = 7 4800 bps
S37 = 8 7200 bps
S37 = 9 9600 bps
To Next Page
Loading...
