User’s Manual 8-6
Optional Devices
Removing a SD/MS/MS Pro/MMC/xD card
To remove the memory card, follow the steps below.
1. In Windows
®
XP, open the Safely Remove Hardware icon on the
system tray and disable the inserted memory card.
2. Grasp the card and remove it.
Removing the inserted memory card
Make sure the SD/MS/MS Pro/MMC/xD card is oriented properly before
you insert it.
Memory Stick Duo/Memory Stick Pro Duo/Mini SD card is not supported.
Insert only one card when using Multiple Digital Media Card Slot.
Use TOSHIBA SD Memory Card Format Utility for formatting. Do not
format a memory card with Windows
®
as it might result in that the card not
being able to be used with some peripheral devices.
If Windows fail to read the SD/MS/MS Pro/MMC/xD card, remove it then
reinsert it.
SD/MS/MS Pro/MMC/xD card
■ Make sure the Multiple Digital Media Card Slot indicator is out before
you remove the card or turn off the computer’s power. If you remove
the card or turn off the power while the computer is accessing the card
you may lose data or damage the card.
■ Please do not remove the inserted memory card from the Multiple
Digital Media Card Slot while in Standby or in Hibernation state. If you
do, PC may become unstable or the data in the memory card may be
lost.
■ Do not turn off or make computer in Standby or Hibernation mode
during data is being transferred. The computer could become unstable
or data would be lost.
To Next Page
Loading...
Need help?
General