User’s Manual 3-6
Getting Started
Opening the display
The display panel can be rotated in a wide range of angles for optimal
viewing.
1. Slide the display latch on the front of the computer to the right to unlatch
the display panel.
2. Lift the panel up and adjust it to the best viewing angle for you.
Opening the display panel
Turning on the power
This section describes how to turn on the power.
1. If the external diskette drive is connected, make sure it is empty. If a
diskette is in the drive, press the eject button and remove the diskette.
2. Open the display panel.
3. Press and hold the computer’s power button for two or three seconds.
Turning on the power
When you open the display, hold it with both hands and lift up slowly.
Display latch
After you turn on the power for the first time, do not turn it off until you have
set up the operating system (OS) and the OS has started up.
Power Button
To Next Page
Loading...
Need help?
General