[How to recover from an error]
When an error like “NO PAPER” occurred on the printer, clear the cause of the error, and press the [RESTART] key
on the printer.
For details, please refer to the Owner’s Manual of each printer.
Automatically show Status Windows when errors occur: When checked, the printer status is
periodically monitored and if an error occurred during printing, the status window is displayed.
Status Window Preferences:
Always on top: When checked, the status
window is always displayed on the top of all other
windows.
Hide titlebar: When checked, the titlebar of the
status window is hidden.
Job Verification tab
Enables setting the print job monitoring method.
When either checkbox is checked, printing is
performed while verifying a completion of printing.
Since this feature is not supported, do not change
the default settings.
Communication tab
Enables setting the timeout and polling interval for
the status monitoring are set. Do not change the
default settings.
Notes:
Be sure to disable the status monitor when uninstalling the
printer driver or changing the output port.
When the printer is used as a shared printer, the status
monitor window is not displayed on the client PC.
While the status monitor is displayed, the ON LINE LED blinks
periodically. This is not a failure.
DO NOT enable the status monitor for the printers other than
B-SX4T (203 dpi), B-SX4T-CN (203 dpi), B-SX5T (305 dpi),
B-SX5T-CN (305 dpi), B-SV4, B-SA4T (203 dpi), B-SA4T-CN
(203 dpi), B-SA4T (300 dpi), B-SA4T-CN (300 dpi), B-852-R,
B-452-R, B-462-R, B-EP2DL-G, B-EP4DL-G, B-SX6T (305
dpi), B-SX8T (305 dpi), B-EX4T1 (203 dpi), B-EX4T1 (305
dpi), B-EX4T2 (203 dpi), B-EX4T2 (300 dpi), B-EX4T2 (600
To Next Page
Loading...
