Toshiba B-EP4DL-GH20-QM-R User Manual

16
Symptom
Point to check (Cause)
Solution
The printer cannot
communicate via the
wireless LAN.
(B-EP4DL-GH42-QM-R)
The printer is not turned on. Turn on the printer.
Distance to the host is too far.
Move the printer within a wireless
coverage area.
Obstacles block the radio wave.
Use the printer in a location with no
obstacles.
The printer is used in a location where it
is subjected to noise or interference.
Avoid such locations.
The printer address is not correctly set
on the host.
Correctly set the print address on the host
The channel setting for the access point
or host is incorrect.
Avoid using a channel which interferes
with adjacent access points.
The issue mode is incorrect. Select a correct issue mode.
The printout is light.
The print head is dirty. Clean the print head.
The media is not loaded properly. Load the media properly.
Damaged media is used. Load a new media roll.
The media is not a Toshiba Tec
approved one
Use a Toshiba Tec approved media.
The printer received print
data but does not print.
The [STATUS] lamp is lit or blinking. Clear the error
The media is not loaded properly. Load the media properly.

Toshiba B-EP4DL-GH20-QM-R Specifications

General

Brand	Toshiba
Model	B-EP4DL-GH20-QM-R
Category	Printer
Language	English