Toshiba B-EP4DL-GH20-QM-R User Manual (English)

Other manuals for Toshiba B-EP4DL-GH20-QM-R

Questions and Answers:

T
Thomas HarringtonAug 22, 2025
How to fix a paper jam on a Toshiba B-EP4DL-GH20-QM-R?
- S
  Samantha SmithAug 22, 2025
  If your Toshiba Printer indicates a PAPER JAM, it could be due to several reasons. Make sure the media is loaded properly. If the media has jammed, remove it and reload correctly, then press the [PAUSE] button. Also, check if the media is feeding properly; if not, reload it and press [PAUSE]. If using media with black marks, ensure the reflective sensor detects them; if not, reload the media correctly. Finally, for labels, ensure the transmissive sensor detects gaps; if it doesn't, reload the media and, if needed, reset the threshold.
U
ularsonAug 25, 2025
Why is my Toshiba B-EP4DL-GH20-QM-R not connecting to the wireless LAN?
- R
  Rachel HarmonAug 25, 2025
  If your Toshiba Printer cannot communicate via the wireless LAN (B-EP4DL-GH42-QM-R), make sure the printer is turned on. Position the printer within a wireless coverage area, free from obstacles and avoid locations with noise or interference. Check that the printer address is correctly set on the host. Ensure the channel setting for the access point or host is correct, avoiding channels that interfere with adjacent access points. Finally, select the correct issue mode.
C
Carolyn KingAug 25, 2025
Why Toshiba B-EP4DL-GH20-QM-R received print data but does not print?
- D
  Danielle LyonsAug 26, 2025
  If your Toshiba Printer received print data but does not print, and the [STATUS] lamp is lit or blinking, clear the error. Also, make sure that the media is loaded properly.
D
Dr. Bryan HarveyAug 27, 2025
What to do if my Toshiba B-EP4DL-GH20-QM-R Printer says 'NO PAPER'?
- R
  Rebecca McconnellAug 27, 2025
  If your Toshiba Printer displays 'NO PAPER', it means the printer has run out of media. To resolve this, load a new media roll and then press the [PAUSE] button.
C
Cheryl FuentesAug 27, 2025
Why won't my Toshiba B-EP4DL-GH20-QM-R turn on?
- D
  Dr. Christopher RodgersAug 27, 2025
  If your Toshiba Printer is not turning on when you press the [POWER] button, it might be because the battery pack is not loaded correctly. Ensure you load a fully charged battery pack correctly.
M
Marissa HendersonAug 28, 2025
What to do if my Toshiba B-EP4DL-GH20-QM-R shows 'COVER OPEN'?
- F
  fsmithAug 28, 2025
  If your Toshiba Printer displays 'COVER OPEN', it indicates that the top cover is open. To fix this, simply close the top cover.
G
Gregory BrownAug 29, 2025
Why my Toshiba Printer cannot communicate via IrDA?
- G
  gcruzAug 30, 2025
  If your Toshiba Printer cannot communicate via IrDA, first, ensure the printer is turned on. Then, make sure the printer is close enough to the host (within 10 cm) and that their IrDA windows are facing each other correctly. Avoid direct sunlight on the IrDA window and ensure the window is clean. If you are using a B-EP4DL-GH20-QM-R model, disconnect the RS-232C cable.
A
Ashley SmithAug 31, 2025
Why is my Toshiba Printer not connecting via Bluetooth?
- T
  trujilloamandaAug 31, 2025
  If your Toshiba Printer cannot communicate via Bluetooth (B-EP4DL-GH32-QM-R), ensure the printer is turned on. Move the printer closer to the host within 3 meters. Avoid locations with noise or interference. Verify that the printer address is correctly set on the host, and select the correct issue mode.
J
Jennifer CruzSep 1, 2025
Why can't my Toshiba B-EP4DL-GH20-QM-R Printer communicate via USB?
- C
  Casey ClarkeSep 1, 2025
  If your Toshiba Printer cannot communicate via USB, first, ensure the printer is turned on. If you are using a B-EP4DL-GH20-QM-R model, disconnect the RS-232C cable. If you are using a B-EP4DL-GH32-QM-R or B-EP4DL-GH42-QM-R model, terminate the wireless communication. Also, make sure that you select the correct issue mode.
B
Brittney SnyderSep 2, 2025
Why my Toshiba B-EP4DL-GH20-QM-R Printer cannot communicate via the serial interface?
- K
  Kimberly FoxSep 2, 2025
  If your Toshiba Printer cannot communicate via the serial interface (B-EP4DL-GH20- QM-R), ensure the printer is turned on. Check that the interface cable is connected correctly. Also, confirm that the correct issue mode is selected and that the communication conditions are properly set.

Toshiba B-EP4DL-GH20-QM-R Specifications

General

Print Resolution	203 dpi
Connectivity	USB, Serial, Ethernet
Print Speed	Up to 4 ips (101.6 mm/sec)
Max Print Width	104 mm
Media Thickness	0.06 to 0.15 mm
Memory	8 MB
Supported Operating Systems	Windows, Linux
Power Supply	AC 100-240V
Media Width	25.4 to 110 mm