E-1
Quick Installation Manual
This manual is a quick guide on how to set up your B-EX6T printer.
For more details please read the Owner’s manual in the CDROM.
Important Information to the User
In order to meet Product Safety, FCC and CE marking requirements, it is
advised to use the power cord which was shipped with this product. Otherwise
this cable needs to meet the following standards.
Power Cord
For this product a UL listed, detachable power cord is required. Outside the US,
power cords need to meet the particular country’s certification and application
requirements. If a different power cord is used from that described above you
might violate safety certifications which are in force in the country of use. The
socket-outlet needs to be installed near the equipment and must be easily
accessible.
TOSHIBA BARCODE PRINTER
B-EX6T Series
!00TSCC0335801!
To Next Page
Need help?
General
