Toshiba B-SX5T - Default Chapter; Table of Contents

EO10-33013B
(Revision Date: May 22, 2009)
TABLE OF CONTENTS
Page
1. OUTLINE -------------------------------------------------------------------------------------------------1- 1
1.1 PRINTER SPECIFICATIONS---------------------------------------------------------------------------1- 1
1.2 DESCRIPTION OF MODEL NUMBER ---------------------------------------------------------------1- 1
1.3 APPEARANCE AND DIMENTIONS (APPROXIMATE) -----------------------------------------1- 2
1.4 BASIC SPECIFICATIONS -------------------------------------------------------------------------------1- 3
1.5 ELECTRONICS SPECIFICATIONS-------------------------------------------------------------------1- 6
2. SUPPLY SPECIFICATIONS-------------------------------------------------------------------------2- 1
2.1 MEDIA --------------------------------------------------------------------------------------------------------2- 1
2.2 RIBBON ------------------------------------------------------------------------------------------------------2- 4
2.3 CARE AND HANDLING OF THE MEDIA AND RIBBON ----------------------------------------2- 5
2.4 SPECIFICATION OF RFID TAG (B-9704-RFID-U1-US/EU-R, H1-QM-R)------------------2- 6
2.5 SPECIFICATION OF RFID TAG (B-SX704-RFID-U2-EU/AU-R) ----------------------------- 2-11
2.6 SPECIFICATION OF RFID TAG (B-SX704-RFID-U2-US-R) ---------------------------------- 2-18
2.7 SPECIFICATION OF RFID TAG (B-SX704-RFID-U2-CN-R)---------------------------------- 2-26
3. OPTIONAL KIT -----------------------------------------------------------------------------------------3- 1
3.1 CUTTER MODULE: B-4205-QM/QM-R (Swing Cutter),
B-8204-QM/QM-R (Rotary Cutter) -----------------------------------------------------------3- 2
3.2 STRIP MODULE: B-9904-H-QM/QM-R (option for the B-SX4T)-------------------------------3- 2
3.3 RIBBON SAVING MODULE: B-9904-R-QM (option for the B-SX4T) ------------------------3- 2
3.4 RIBBON SAVING MODULE: B-9904-R2-QM/QM-R (option for the B-SX4T)--------------3- 2
3.5 PCMCIA INTERFACE BOARD: B-9700-PCM-QM/QM-R ---------------------------------------3- 3
3.6 EXPANSION I/O INTERFACE BOARD: B-7704-IO-QM/QM-R (option for the B-SX4T) 3- 3
3.7 BUILT-IN LAN INTERFACE BOARD: B-9700-LAN-QM/QM-R---------------------------------3- 3
3.8 USB INTERFACE BOARD: B-9700-USB-QM/QM-R ---------------------------------------------3- 3
3.9 RFID MODULE: B-9704-RFID-U1-US/U1-EU/U1-EU-R/H1-QM/H1-QM-R-----------------3- 4
3.10 RFID MODULE: B-SX704-RFID-U2-EU/AU/US/CN-R -------------------------------------------3- 5
3.11 WIRELESS LAN MODULE (B-9700-WLAN-QM-R)-----------------------------------------------3- 7
CAUTION!
1. This manual may not be copied in whole or in part without prior written permission of TOSHIBA
TEC.
2. The contents of this manual may be changed without notification.
Copyright © 2004
by TOSHIBA TEC CORPORATION
A
ll Rights Reserved
570 Ohito, Izunokuni-shi, Shizuoka-ken, JAPAN
• This manual is intended for both B-SX4T series and B-SX5T series. Please note that the
illustrations and pictures provided are of the B-SX4T series.
• The SP40II has been developed from the B-SX4T-GS10-QP, and the differences between
two are the color of the front cover and the operation panel ass’y, the model name label, and
the CD-ROM. The other specifications including the firmware are common.