3. OPTIONAL KIT EO10-33013B
3.5 PCMCIA INTERFACE BOARD: B-9700-PCM-QM/QM-R
3- 3
3.5 PCMCIA INTERFACE BOARD: B-9700-PCM-QM/QM-R
The PCMCIA Interface board allows use of the following ATA card, LAN card, or flash memory card
when connected to the CPU PC board.
• Number of slots: Type II slot - 2 slots
Type Maker Description Remarks
ATA Card
San Disk,
Hitachi
A card conforming to the PC card
ATA standard
----------
LAN Card 3 COM 3CCE589ET Series
Install into the slot (2) only.
(This card installed into the
slot (1) will not work.)
Maxell EF-4M-TB
Maxell EF-4M-TB
Centennial
Technologies INC.
FL04M-15-11119-03
Read/Write
INTEL
IMC004FLSA
Simple TECNOLOGY
STI-FL/4A
Mitsubishi
MF84M1-G7DAT01
PC Card KING MAX
FJN-004M6C
Centennial
Technologies Inc.
FL04M-20-11138-67
PC Card
FJP-004M6R
Flash Memory
Card (4 MB)
Mitsubishi
MF84M1-GMCAV01
Maxell
EF-1M-TB
Flash Memory
Card (1 MB)
Mitsubishi
MF81M1-GBDAT01
Read (See NOTE.)
NOTE: Reading a read-only-type flash memory is possible if it has been used on the TOSHIBA TEC
printer, such as B-472 and B-572.
3.6 EXPANSION I/O INTERFACE BOARD: B-7704-IO-QM/QM-R
(option for the B-SX4T)
This interface board is used to connect the printer to external devices, such as a labeler. The
input/output signals from the connected external devices can control label feeding or printing and
indicate the print status.
3.7 BUILT-IN LAN INTERFACE BOARD: B-9700-LAN-QM/QM-R
This board enables the printer to connect to the host by means of Local Area Network.
• Supporting 10/100M bps
• Internal 32 bit wide data pass (for the packet buffer memory)
• Conforming to IEEE 802.3/802.3u, 100 Base-Tx/10Base-T physical layer
• Auto negotiation: 10/100M bps, Full/Half Duplex
3.8 USB INTERFACE BOARD: B-9700-USB-QM/QM-R
Installing this board enables a connection to a PC which has a USB interface.
• Conforming to USB 1.1
• Supporting Full-speed (12M bps) transmission
• Supporting the two types of data transmission types, Control transmission and Bulk transmission.
CC
DC
AA
To Next Page
Loading...
