Toshiba B-SX5T - Basic Specifications

1. OUTLINE EO10-33013B
1.4 BASIC SPECIFICATIONS
1- 3
1.4 BASIC SPECIFICATIONS
1) Printing method ................... Thermal direct printing or thermal transfer printing
2) Print head
[B-SX4T: 4 inches]
(1) Total number of dots ...... 832 dots (3) Effective print width ....... 104.0 mm
(2) Dot density ..................... 8 dots/mm (4) Thermal pitch .......…...... 0.125 mm
[B-SX5T: 5 inches]
(1) Total number of dots ...... 1536 dots (3) Effective print width ....... 128.0 mm
(2) Dot density ..................... 12 dots/mm (4) Thermal pitch .......…...... 0.083 mm
3) Print speed
B-SX4T................................. 3”/sec., 6”/sec., 10”/sec.
B-SX5T................................. 3”/sec., 5”/sec., 8”/sec.
NOTE: These print speeds are available when printing ratio is less than 15% of the entire label or tag
paper.
4) Format size (W) x (L)
B-SX4T................................. Max. 104.0 mm x 1498.0 mm
B-SX5T................................. Max. 128.0 mm x 1498.0 mm
5) Issue mode .......................... Batch
Auto cut (Auto cut mode is available only when the optional cutter is
attached.)
Strip (In case of the B-SX4T, the strip mode is available only when the
optional strip module is attached.)
6) Type of bar code/two dimensional code
(1)
JAN8, EAN8, JAN13, EAN13, UPC-A, UPC-E
(13)
PDF417
(2)
EAN8, EAN13, UPC-A, UPC-E + 2digit
(14)
QR Code
(3)
EAN8, EAN13, UPC-A, UPC-E + 5digit
(15)
Industrial 2 of 5
(4)
NW-7
(16)
Customer Bar Code
(5)
CODE39 (STANDARD)
(17)
POSTNET
(6)
CODE39 (FULL ASCII)
(18)
RM4SCC
(7)
ITF
(Royal Mail 4 State Customer Code)
(8)
MSI
(19)
KIX CODE
(9)
CODE93
(20)
Maxi Code
(10)
CODE128
(21)
Micro PDF417
(11)
EAN128
(22)
CP CODE
(12)
Data Matrix
(23)
RSS14
7) Bar code rotation ................. 0
°, 90°, 180°, 270°