Toshiba B-SX5T - 3 Optional Kit

3. OPTIONAL KIT EO10-33013B
(Revision Date: May 22, 2009)
3. OPTIONAL KIT
3- 1
3. OPTIONAL KIT
Applicable Model
Option Name Type
B-SX4T/5T-
QQ/QP
B-SX4T/5T-QM-R
Use
B-4205-QM O X
Swing cutter
module
B-4205-QM-R X O
B-8204-QM O X
Rotary cutter
module
B-8204-QM-R X O
This cutter module uses a swing or rotary
cutter. It cuts backing paper of labels and tag
paper automatically in “Stop and cut” mode.
B-9904-H-QM O X
Strip module
(B-SX4T only)
B-9904-H-QM-R X O
This strip module strips the label from the
backing paper with the take-up block and strip
block. When the rewinder guide plate is
attached, the tag paper and label with backing
paper are wound.
B-9904-R/R2-QM O X
Ribbon saving
module
(B-SX4T only)
B-9904-R2-QM-R X O
The ribbon saving module moves the print
head up and down by using a solenoid to save
the ribbon loss as far as possible.
B-9700-PCM-QM O X
PCMCIA
interface board
B-9700-PCM-QM-R X O
This board enables use of the following
PCMCIA cards.
LAN card: 3 COM EtherLink® III
(recommended)
ATA card: Conforming to PC card ATA
standard
Flash memory card: 1MB and 4MB card
B-7704-IO-QM O X
Expansion I/O
interface board
(B-SX4T only)
B-7704-IO-QM-R X O
Installing this board allows connection to
external devices.
B-9700-LAN-QM O X
Built-in LAN
interface board
B-9700-LAN-QM-R X O
This board enables the printer to be used in a
LAN network.
B-9700-USB-QM O X
USB interface
board
B-9700-USB-QM-R X O
Installing this board enables a connection with
a PC which has a USB interface.
B-9704-RFID-U1-US
B-9704-RFID-U1-EU
B-9704-RFID-H1-QM
O X
B-9704-RFID-H1-QM-R O O
B-9704-RFID-U1-EU-R X O
RFID module
B-SX704-RFID-U2-
EU/AU/US/CN-R
X O
Installing this module enables read and write
of RFID tags.
Applicable frequency band differs depending
on the module types:
U1-US: UHF, 902MHz to 928MHz
U1-EU/EU-R: UHF, 869.5MHz
H1-QM/QM-R: HF, 13.56MHz
U2-EU-R: UHF, 869.7-870.0MHz
U2-AU-R: UHF, 918.25-925.75MHz
U2-US-R (US): UHF, 902.75 to 927.5MHz
(AU): UHF, 918.25 to 925.75MHz
(TW): UHF, 922.25 to 927.25MHz
(KR): UHF, 910.4 to 913.6MHz
U2-CN-R: UHF, 920.625-924.375MHz
B-4905-FF-QM O X
Fanfold Paper
Guide
B-4905-FF-QM-R O O
This is a paper guide exclusively used for
fanfold paper. Attaching it in place of the
standard paper guide allows the printer to
print on fanfold paper.
Wireless LAN
Module
B-9700-WLAN-QM-R X O
Installing this PC board allows a
communication by wireless LAN.
O: Installable
X: Not installable
NOTE: To purchase the optional kits, please contact the TOSHIBA TEC Head Quarters.