2. PRINTER SETUP ENGLISH VERSION
2.3 Loading the Media
E2-
5
2.3 Loading the Media
(Cont.)
9. Pull the media out of the front of the printer, and adjust the Media
Guides to the media width. This will automatically center the media.
10. Lower the Upper Sensor Ass’y until the Upper Sensor Lever clicks
into position.
Make sure that the Upper
Sensor Ass’y is locked. If it is
unlocked, a paper jam or print
failure may occur.
Be sure to close the Upper
Sensor Ass’y before closing
the Top Cover. If the Upper
Sensor Ass’y is opened, it may
be damaged.
To Next Page
Loading...
