Toshiba BA420T Series - APPENDIX 2 POWER CORD

7. APPENDIX 2 POWER CORD ENGLISH VERSION
7. APPENDIX 2 POWER CORD
E7-1
7. APPENDIX 2 POWER CORD
When purchasing the power cord:
Since the power cord set is not enclosed in this unit, please purchase an approved one that meets the following standard from
your authorized Toshiba Tec representative.
Country Agency
Certification
mark
Country Agency Certification mark Country Agency
Certification
mark
Australia SAA Germany VDE Sweden SEMKKO
Austria OVE Ireland NSAI Switzerland SEV
Belgium CEBEC Italy IMQ UK ASTA
Canada CSA Japan METI UK BSI
Denmark DEMKO Netherlands KEMA U.S.A. UL
Finland FEI Norway NEMKO Europe HAR
France UTE Spain AEE Taiwan CNS
South
Africa
SABS
Power Cord Instruction
1. For use with 100 – 125 Vac mains power supply, please select a power cord rated Min. 125V, 10A.
2. For use with 200 – 240 Vac mains power supply, please select a power cord rated Min. 250V.
3. Please select a power cord with the length of 4.5m or less.
Country/Region North America Europe United Kingdom Australia South Africa
Power Cord
Rated (Min.)
Type
Conductor size
(Min.)
125V, 10A
SVT
No. 3/18AWG
250V
H05VV-F
3 x 0.75 mm
2
250V
H05VV-F
3 x 0.75 mm
2
250V
AS3191 approved,
Light or Ordinary
Duty type
3 x 0.75 mm
2
250V, 6A
H05VV
3 x 0.75 mm
2
Plug
Configuration
(locally approved
type)
Rated (Min.)
125V, 10A 250V, 10A 250V, *1 250V, *1
22.2
16.3± 0.5
21± 0.5
7± 0.04
5± 0.05
38.5
19.05