Toshiba BA420T Series - PRINTER SPECIFICATIONS

5. PRINTER SPECIFICATIONS ENGLISH VERSION
5. PRINTER SPECIFICATIONS
E5-
1
5. PRINTER SPECIFICATIONS
This section describes the printer specifications.
Model
Item
BA420T-GS12-QM-S BA420T-TS12-QM-S
Dimension (W x D x H)
238 mm x 339 mm x 332 mm (9.4”x 13.3”x 13.1”)
Weight
26.5 lb (12 kg) (Media and ribbon are not included.)
Operating
temperature
range
Thermal direct
0
°
C to 40
°
C (32
°
F to 104
°
F)
Thermal transfer 5°C to 40°C (41°F to 104°F)
Relative humidity
25% to 85% RH (no condensation)
Power supply
Universal power source AC100V to 240V, 50/60Hz
±
10%
Input voltage
AC100 to 240V, 50/60Hz
±
10%
Power
consumption
During a print job
*1
2.1A (100V) to 1.1A (240V), 155W rating
During standby
0.19A (100V) to 0.15A (240V), 13W (100V) to 22W (240V)
Resolution
8 dots/mm (203 dpi)
11.8 dots/mm (300 dpi)
Printing method
Thermal transfer or Thermal direct
Printing speed 50.8 mm/sec. (2 inches/sec.) *2 203.2 mm/sec. (8 inches/sec)
101.6 mm/sec. (4 inches/sec.)
152.4 mm/sec. (6 inches/sec.)
Available media
width
(including
backing paper)
Thermal direct 25.0 mm to 118.0 mm (1 inch to 4.6 inches)
Thermal transfer 25.0 mm to 114.0 mm (1 inch to 4.5 inches)
Maximum effective print width
104.0 mm (4.1 inches)
105.7 mm (4.2 inches)
Issue mode
Batch, Strip (option), and Cut (option)
LCD Message display
Graphic type 128 x 64 dots
*1: While 30% slant lines are printed in the specified form
*2: When select 2"/sec on thermal transfer mode , it will print at 3"/sec.