6F8C1118
xv
Guide to Reading this Manual
This manual is organized as follows: You may start from the appropriate chapter as
necessary.
Chapter 1 Before Turning on the
Power
Summarizes items and caution that you should
know before using this equipment.
Chapter 2 Installation Describes how to install the equipment to the
base and connect the cables.
Chapter 3 Handling Describes how turn on/off the power and the
handling of each unit.
Chapter 4 Maintenance Describes the product life of main components in
addition to the daily maintenance procedure.
Chapter 5 RAS Function Describes the standard RAS function.
Chapter 6 Hardware Setup Hardware setup is not necessary for normal use.
This chapter describes how to set BIOS in case
the setting needs to be verified or changed.
Appendix A Q&A Provides answers to problems such as “The
power does not turn on.”
Appendix B Device Specifications Provides specifications of this equipment and
specifications and pin map of external connectors.
Refer to the operation manual of the respective operating system (OS) for information
concerning the operating system used by this device.
To Next Page
Loading...
