Toshiba C3PU35 - Name and Function of each Part

Chapter 1 Before Turning on the Power
Computer module C3PU35 User’s Manual
2
1.2 Name and Function of Each Part
10/100BASE-TX
connector
Connector for the Ethernet
10BASE-T/100BASE-TX
connector.
RGB connector Connector for the analog RGB
display
RS-232C connector
(COM1)
Connector to connect the
RS-232C interface device (such
as mouse or modem).
USB connector Connector to connect USB
compatible device.
LEDs and push
button switches
LEDs indicating the module
status and RESET/INZ button.
DIP switch User settable switches. The
setting can be read from user
application program in the C3.
PC card slots Slot to insert the PC card.
Push button switches
Switches to perform standalone
initialization of the module.
RST Switch to perform hardware
reset of the module.
INZ Switch to shut down Windows
and restart.
PC CARD
RS232C
USB
Connector
RGB Connector
Ethernet
10/100BASE-TX
C3PU35
Status LED
HDD ／
Flash Disk
RST SW
INZ SW
DIP-SW
1
0
/
1
0
0
B
A
S
E
-
T
X
R
G
B
USB1
USB2
1
2
C
O
M
RST
INZ
RUN
HDD
4
3
2
1
SW1