What to do if abnormal temperature is detected in Toshiba C3PU35?
If an abnormal temperature is detected, first check that the air inlet of the fan unit is not blocked. Next, verify that the operating temperature is within the specified range. If necessary, lower the room temperature by turning on the air conditioner in the room where the controller is installed.
What to do if error rundown (ERROR) occurs on Toshiba Controller?
If an error rundown occurs, remove the cause of the error and reset the error status using the engineering tool. Then, change the operation mode to "RUN", or turn the power on again.
What to do if memory is lost on Toshiba C3PU35?
If memory is lost, clear the memory, download the program from the engineering tool, and restart the controller.
What to do if exception interruption is detected on Toshiba C3PU35?
If an exception interruption is detected, turn the power on again to restart the controller. If the error persists, replace the L3 CPU module.
What to do if code memory DL error occurs on Toshiba Controller?
If a code memory DL error occurs, format the E2PROM to clear the memory, reload the user application, and restart the controller.
What to do if user information DL error occurs on Toshiba C3PU35?
If a user information DL error occurs, download the program from the engineering tool and restart the controller.
What to do when an error occurs in the L3 CPU module of Toshiba C3PU35 Controller?
When an error occurs in the L3 CPU module, conduct an error reset operation before rebooting the CPU module.
What to do if main task is jammed on Toshiba C3PU35 Controller?
If the main task is jammed, increase the main scan cycle or decrease the program volume for main scan tasks.
What to do if user task stop boundary is over on Toshiba C3PU35 Controller?
If the user task stop boundary is exceeded, clear the memory of the L3 CPU module and download the application program again.
What to do if disconnected fan cable is suspected in Toshiba C3PU35?
If a disconnected fan cable is suspected, check the cable connection. If necessary, replace the fan unit.
General| Chipset | Unknown |
|---|---|
| Memory Capacity | Unknown |
| Operating Temperature | Unknown |
| Dimensions | Unknown |
| Weight | Unknown |
| Communication Port | USB |
To Next Page
