18 - English
Connections
Accessories
Step 1: Unpacking
Check for the supplied accessories below.
•
Audio/Video Cable
•
RF Cable for TV
•
Remote Control
•
Batteries for Remote Control (AA Size)
•
User’s Manual
*
Dispose of batteries according to local environmental
regulations. Do not put them in the household trash.
Step 2:
Connecting DVD
Recorder-VCR to the TV using
the RF Cable
To receive television programmes a signal must be
received from one of the following sources:
•
An outdoor aerial
•
An indoor aerial
•
A cable television network
•
A satellite receiver
Make sure that both the television and the
DVD Recorder-VCR are switched off before
connecting the cables.
Remove the aerial or network input cable from
the television.
1
Connect this cable to the 75Ω coaxial socket
marked on the rear of your DVD Recorder-
VCR.
2
Plug the RF cable supplied into the socket on
your DVD Recorder-VCR.
3
Plug the other end of the RF cable into the con-
nector previously used for the aerial on the televi-
sion.
4
Note
To obtain better quality pictures and sound on
your television, you can also connect your
DVD Recorder-VCR to the television via the
SCART cable (see next page) if your televi-
sion is equipped with this type of connection.
Note
To Next Page
Loading...
