English - 27
Plug & Auto Setup
The DVD Recorder-VCR will automatically set itself up
when it is plugged into the mains for the first time.
TV stations will be stored in memory. The process takes
a few minutes. The DVD Recorder-VCR will then be
ready for use.
Connect the RF cable as indicated on page 19.
• Connecting Your DVD Recorder-VCR to the TV
using the RF Cable.
1
Start the auto setup.
3
Start the auto scanning.
4
Plug the DVD Recorder-VCR into the mains.
• “Auto” in the front panel display flickers.
2
Wait current time and date are displayed
automatically.
5
Check the date and time.
• if it is: Correct
Press OK button then the data and time
will be saved.
• if it is: Incorrect
Refer to “Seting the Date and Time”
menu, when you want to change the date
and time.
6
System Setup
To Next Page
Loading...
