Toshiba D-VR3SB - Selection the Colour Mode

44 - English
System Setup
Select “Colour System”
Using the ❷buttons, move the selection bar
to “Colour System” then press
❿ or OK button to
select Colour System option.
Automatic -> PAL -> B/W.
• Automatic : When playing back a tape, the sys-
tem standard is automatically
selected by the DVD Recorder-
VCR.
• B/W : Black and White.
5
Programme
Select “VCR”
Move the selection bar to “VCR”, then press ❿
or OK button.
4
VCR
Front Display
: Automatic
: On
: RGB
NICAM
AV1 Output
Programme
Selection the Colour
Mode
Before recording or playing back a tape, you can select
the required system standard. Otherwise, the system
automatically selects the reception standard when you
select Automatic.
• When playing back a tape, the standard is automatical-
ly selected by the DVD Recorder-VCR.
Open “MENU”
With the VCR in play mode, Press the MENU
button.
1
Select “Setup”
Using the ❷buttons, move the selection bar
to “Setup” then press
❿ or OK button to select.
2
Select “System”
Using the ❷buttons, move the selection bar
to “System” then press
❿ or OK button to select.
3
On completion, press RETURN three times to
exit the menu.
6
Programme
Downloaded From Disc-Player.com Toshiba Manuals