Toshiba D-VR3SB - Changing the Preset Manual Setup Table

32 - English
System Setup
Changing the Preset
Manual Setup Table
You can rearrange the Manual Setup Table and give dif-
ferent programme numbers to the manual setup listed
according to your own preferences.
Open “MENU”
With the DVD in Stop mode, press the MENU
button.
1
Select “Setup”
Using the ❷buttons, move the selection bar
to “Setup” then press
❿ or OK button to select.
2
Select “Install”
Using the ❷buttons, move the selection bar
to “Install”, then press
❿ or OK button to select.
3
Select “Manual Setup”
Move the selection bar to “Manual Setup” using
the
❷buttons then press ❿ or OK button to
select.
4
: Ch 60
Programme
Programme
Press the ❷ button to select Delete.
Then press OK button to delete.
6
Press the ➛❿buttons to select Yes, and then
press the OK button.
7
Press the ❷buttons to select a PR number
as required then press
❿ or OK button to select.
5
Edit
Delete
Swap
Edit
Delete
Swap
PR.03
Do you want to delete 'PR.03'?
Yes No
Repeat the same procedure from Step 5
onwards until all the required stations have been
cleared.
8
On completion, press the RETURN button four
times to exit the menu.
9
Downloaded From Disc-Player.com Toshiba Manuals