Toshiba DP5000-Series - Door Name; System Sd;Name; Phone Key Label and LM Key Label

Administrator Programming
Administrator Mode
Strata CIX DP5000-series Telephone UG 11/08 97
Door Name
Door Phone should be setup and programmed within the Strata CIX before a Door
Name can be assigned.
1. Enter Administrator Mode.
2. Press
Next, display shows Door Name
3. Press
Hold, display shows Door Phone Number.
4. Enter the Door Phone number (01~24).
5. Enter the Door Phone name
6. Press
Hold to save the name.
7. Repeat steps 4~6 to enter another Door Phone name.
System SD/Name
1. Enter Administrator Mode.
2. Press
Next twice until display show System SD/Name.
3. Press
Hold, display shows IDX
4. Enter three digit Speed Dial Index (000~799).
5. Enter the Speed Dial name/label.
6. Press
Hold to save your changes
7. Repeat steps 4~6 to label additional Speed Dials.
Phone Key Label and LM Key Label
See Chapter 4 – ADM/DSS Console.