Administrator Programming
DKT2000 Mode On/Off
104 Strata CIX DP5000-series Telephone UG 11/08
DKT2000 Mode On/Off
Before a cordless telephone (DKT2204-CT or DKT2304-CT) can share a digital
station port with a DP5000-series telephone set, the port must be programmed into
2000 mode. If the mode is not changed to 2000-mode, the DP5000 phone will not
work and the display will be blank. Also see CIX Installation and Maintenance
Manual for additional information.
In 2000-mode:
• Only 16 characters by two lines display on the LCD.
• LCD Programmable Feature Button does not work
• Spdial button does not work
Step 1: Turn DKT2000 Mode On/Off
Important! Change the mode on DP5000-series telephone before connecting a
DKT2204-CT or DKT2304-CT.
1. On the DKT3x00 telephone, press
3+6+9+Hold (simultaneously).
2. Press
#.
3. Press
FB7. LED On = 2000 telephone. LED Off = 5000-series telephone.
4. Press
Hold.
5. Lift the handset to exit programming mode. Wait a few seconds for the telephone
to reset itself.
Step 2: Connect Cordless Telephone to DP5000-series
Telephone
The cordless telephone (base station) will connect to the digital station port and then
in turn the DP5000 phone will connect to the cordless base station.
To Next Page
Loading...
