User’s Manual EN-43
Disconnecting the dynadock
Setting Message Notify Service
(Sample Image) Notify message service screen
■ Check “Show undocking complete message” box:
If you click “Eject Dock” or “Eject Dock and Sleep”, the eject action will
be executed. After the process finishes successfully, the following
message prompts.
(Sample Image) Prompt message
■ Uncheck “Show undocking complete message” box:
If you click “Eject Dock” or “Eject Dock and Sleep”, the eject action will
be executed and finish without any prompts. In this case, it is difficult to
judge whether the device has been removed safely or not
.
■ Check “Show unexpected remove message” box:
The utility can monitor the device changes in the system. If the dock is
removed by accident, a warning will be shown.
(Sample Image) Warning message
To Next Page
Loading...
Need help?
General
