2-9
2
5
Use the or key to select whether you
know the receiver compression.
• When you know the receiver’s compression mode and want
to specify the compression mode, select “1.YES” and press
the
key. Go to next step.
• When you do not know the receiver’s compression mode
and want to skip the setting, select “2.NO” and press the
key. Go to Step 7.
Note
• When you are sending a document in the Scan to E-mail
Mode, the scanning condition setting is completed in case
you select “2.NO” at this screen.
DO YOU KNOW THE RECEIVER
COMPRESSION ?
1.YES
2.NO
6
Use the or key to select desired
compression mode and press the key.
• To cancel setting midway, press the key.
Note
• When you are sending a document in the Scan to E-mail
Mode, only “MH” or “MMR” can be selected for the
compression mode.
• When you are sending a document in the Scan to E-mail
Mode, the scanning condition setting is completed.
SELECT RECEIVER COMPRESSION
1.MH
2.MR
3.MMR
4.JBIG
7
Use the or key to select whether you
know the receiver paper size.
• When you know the receiver’s paper size and want to specify
the paper size, select “1.YES” and press the
key. Go
to next step.
• When you do not know the receiver’s paper size and want
to skip the setting, select “2.NO” and press the key.
Go to Step 9.
DO YOU KNOW THE RECEIVER
PAPER SIZE ?
1.YES
2.NO
8
Use the or key to select desired paper
size and press the key.
• To cancel setting midway, press the key.
SELECT RECEIVER PAPER SIZE
1.A4
2.B4
3.A3
4.LT
5.LG
6.LD
9
Scanning condition setting is completed.
• Continue the operation for specifying the recipients.
ENTER E-MAIL ADDRESS(256MAX):
JUL04-2001 11:30AM M :100%
RESOLUTION: CUSTOM
:AUTO
COMM.OPTION
To Next Page
Loading...
