EasyManua.ls Logo

Toshiba e-studio 16 - 1 Installation and Device Configuration; Configuration of the CD-ROM; Computer Requirements

Toshiba e-studio 16
75 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-2
1
2
3
4
5
6
7
9
10
11
12
8
The TOSHIBA Viewer system is compatible with Microsoft Windows 95/98/Me, Microsoft Windows NT4.0,
or Microsoft Windows 2000.
Make sure that your computer meets the following criteria.
PC: PC/AT 100% compatible; Pentium 150 MHz or higher
Operating system: Microsoft Windows 95 (OSR2)
Microsoft Windows 98
Microsoft Windows Me
Microsoft Windows NT 4.0 (Service Pack 4 or later installed)
Microsoft Windows 2000
PC memory: 32M Bytes minimum (64M Bytes recommended) for Windows 95/98 First
Edition
64M Bytes minimum (128M Bytes or more recommended) for Windows 98
Second Edition, Windows Me, Windows NT 4.0, and Windows 2000
Display: A 24-bit color video card and driver is recommended
NIC: Network card is required
The configuration of the CD-ROM and the purposes for each folder are as described below.
\Toshiba Viewer via Network
Includes the Setup.exe to install the TOSHIBA Viewer.
\InternetFax Operators Manual
Includes the Internet Fax Operators Manual (PDF file type).
\Network Administrator Manual
Includes the Network Administrator’s Manual (PDF file type).
\Acrobat Reader
Includes Acrobat Reader application to read Internet Fax Operators Manual.
INSTALLATION AND DEVICE CONFIGURATION
NOTE
The Requirements indicated here are minimums. As with most Windows applications, TOSHIBA
Viewer will run faster when used on a PC with a faster processor or with more RAM. If you are
using other applications on your PC at the same time as TOSHIBA Viewer, a faster processor
and additional RAM are highly recommended.
Computer Requirements
Configuration of the CD-ROM

Table of Contents

Other manuals for Toshiba e-studio 16

Related product manuals