Toshiba e-studio 16 - Page 58

2-7
1
2
3
4
5
6
7
9
10
11
12
8
4
Enter System Device Name and Descriptive
Device Name
• Default System Device Name and Descriptive
Device Name are already entered.Rename them
if required.
6
Enter Network setting that your e-STUDIO16/
20/25 is connected to
• Enter Network settings of e-STUDIO16/20/25 and
Internet Fax Kit for each entry field.
NOTE
• At least IP Address, FTP User Name and
FTP Password must be entered.
• If the bootP/DHCP Setting is set to ENABLE
in the TCP/IP setting of e-STUIDO16/20/25,
tick in the box of Determine IP Address
every time driver loads.
• Click Next.
5
Select Typical for the type of Setup
• Click Next.