3-7
1
2
3
4
5
6
7
9
10
11
12
8
Double-click on Add settings file.
A “New settings” file is created.
Right-click on the new settings file and select Load....
NOTE
In order to create a user phonebook file to be saved
on your hard disk, refer to the section “Saving the
Phonebook”.
The Load settings screen appears. Designate the
hard disk location of the desired set file, select the
file, then click on Open. The set file is loaded.
Continue to Step 2c.
2
c
Copy the phonebook settings
Left-click and hold on the user phonebook file, then
drag it to the device phonebook file, and release the
left mouse button.
NOTE
Initially, your mouse pointer will become a “circle with
diagonal line”. Upon reaching the desired phonebook
file, the pointer will take the form of an “address
label”. Upon releasing the left mouse button, the
contents of the user phonebook file are copied to
the device phonebook file.
Click the Write Settings button to download the new
settings to your e-STUDIO16/20/25.
NOTE
Click the Cancel button to cancel adding/editing the
phonebook contacts.
To Next Page
Loading...
