Toshiba e-studio 160 - Disassembly and Replacement (Fuser Unit); Press Roller and Cleaning Roller Bushing Removal

e-STUDIO160/200/250 FUSER UNIT/PAPER EXIT UNIT 14 - 20 December 2002 TOSHIBA TEC
16. Release the spring and detach the cleaning
roller bushing.
Fig. 14-7-37
Fig. 14-7-38
097-6
097-7
Cleaning roller
bushing
Spring
Cleaning roller
bushing
Spring
Fig. 14-7-35
15. Release the cleaning roller bushing and remove
the cleaning roller.
Fig. 14-7-36
097-9
097-10
E-ring
Bearing
Press roller
Bearing
E-ring
Cleaning roller
13. Remove 2 screws to detach 2 washers secur-
ing the bearing.
14. Remove the press roller by removing 2 E-rings
and 2 bearings.
Washer
Screw
Washer
Screw