e-STUDIO160/200/250 COPYING PROCESS 3 - 14 December 2002 TOSHIBA TEC
4. Peel off the cover sheet A from the developer
assembly.
Fig. 3-4-14
Fig. 3-4-15
[G] Developer material
1. Remove the toner cartridge and the process
unit.
2. Detach the drum assembly. (See Fig. 3-4-2.)
3. Remove 2 screws and detach the developer
cover.
Fig. 3-4-16
4. Turn the developer assembly up side down and
detach the old developer material.
Fig. 3-4-17
Cover sheet A
Developer assembly
3-4-14
3-4-15
Reference position
Cover sheet A
Reference
position
Screw
Screw
Developer cover
Developer assembly
3-4-16
Developer assembly
3-4-17
Notes: 1. Before attaching the cover sheet A, wipe
the surface to be attached.
2. Attach the recovery sheet A in the posi-
tion described in right. Attach the cover
sheet A securely with no portion lifted and
no wrinkles appeared.
To Next Page
Loading...
