December 2002 TOSHIBA TEC 3 - 13 e-STUDIO160/200/250 COPYING PROCESS
[E] Recovery sheet
1. Remove the toner cartridge and the process
unit.
2. Detach the separation claw. (See Fig. 3-4-1.)
3. Detach the drum assembly. (See Fig. 3-4-2.)
4. Detach the drum. (See Fig. 3-4-8.)
5. Peel off the recovery sheet.
Fig. 3-4-10
Fig. 3-4-11
[F] Cover sheet A/ Cover sheet B
1. Remove the toner cartridge and the process
unit.
2. Detach the drum assembly. (See Fig. 3-4-2.)
3. Peel off the cover sheet B from the developer
assembly.
Fig. 3-4-12
Notes: 1. Before attaching the cover sheet B, wipe
the surface to be attached.
2. Attach the cover sheet B by putting it
against the reference position described
in right. Attach the cover sheet B securely
with no portion lifted and no wrinkles ap-
peared.
Fig. 3-4-13
Recovery sheet
3-4-10
Recovery sheet
Reference position
3-4-11
Developer assembly
Cover sheet B
3-4-12
3-4-13
Reference position
Cover sheet B
Reference
position
Notes: 1. Before attaching the recovery sheet, wipe
the surface to be attached.
2. Attach the recovery sheet in the position
described in right. Attach the recovery
sheet securely with no portion lifted and
no wrinkles appeared.
To Next Page
Loading...
