10
© 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO167/207/237
PAPER FEEDING SYSTEM
10 - 1
10. PAPER FEEDING SYSTEM
10.1 General Description
The purpose of this system is to pick up a sheet of paper from the drawer or bypass tray and transport
it to the transfer position. The paper feeding system mainly consists of the pickup roller, registration
roller, bypass sensor, paper empty sensor, registration sensor and the drive system for these compo-
nents.
Fig. 10-1
Bypass paper sensor
Bypass feed roller
Bypass pickup roller
Bypass separation pad
Registration sensor
Registration roller
Separation claw
Paper empty sensor
Pickup roller
To Next Page
Loading...
