Toshiba e-studio 167 - Disassembly and Replacement

To Next Page

To Previous Page

DEVELOPMENT SYSTEM

12 - 11

12.6 Disassembly and Replacement

[A] Developer unit

Note:

Make sure to perform “05-280” and take off the process unit before the developer material is

replaced.

(1) Take off the Process unit.

 P.11-9 "[A] Process unit"

(2) Take off the drum cleaner unit from the pro-

cess unit so that only the developer unit will

be left.

 P.11-10 "[B] Drum cleaner unit"

Notes:

1. Be careful not to touch or scratch the

drum surface at this time.

2. Do not deform the Guide Mylar by touch-

ing this.

Fig. 12-6

Fig. 12-7

Developer unit

Drum cleaner unit

Guide mylar

Other manuals for Toshiba e-studio 167