10
© 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO167/207/237
PAPER FEEDING SYSTEM
10 - 11
[B] Bypass tray
[C] Bypass separation pad
(1) Take off the bypass unit.
P.10-10 "[A] Bypass unit"
(2) Release each latch to take off the front and
rear tray arms.
(3) Take off the bypass tray.
Fig. 10-9
(1) Take off the bypass unit.
P.10-10 "[A] Bypass unit"
(2) Remove 2 screws and take off the bypass
separation pad unit.
Fig. 10-10
(3) Remove 1 screw on the bottom of the bypass
separation pad unit, and take off the cover.
Fig. 10-11
Latch
Bypass tray
Bypass separation pad unit
Cover
To Next Page
Loading...
