Toshiba e-studio 167 - Preparation 2 - Placing Copy Paper

e-STUDIO167/207/237 © 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
2 - 22
[I] Right rear cover
[J] Rear cover
(1) Open the ADU cover.
(2) Remove 1 screw and take off the ADU stop-
per on the rear side.
(3) Take off the 2 screw and take off the right
rear cover.
Fig. 2-21
(1) Remove 5 screws and take off the rear
cover.
Fig. 2-22
Right rear cover
Rear cover