e-STUDIO167/207/237 © 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved
CONTROL PANEL
5 - 8
[B] Control panel PC board (HPNL)
(1) Take off the control panel unit.
P.5-7 "[A] Control panel unit"
(2) Remove 2 screws and take off the cover
while sliding it.
Fig. 5-9
(3) Take off 2 brackets by removing 2 screws
each.
Fig. 5-10
(4) Remove 11 screws, disconnect 1 connector,
and then take off the control panel PC board.
Fig. 5-11
Cover
Bracket
Control panel PC board
Connector
To Next Page
Loading...
