6 Printing from Macintosh
314 Printing from Application on Mac OS 8.6 to 9.x
- Short Edge Punch with 180 degree rotation — Select this to create holes on the bot-
tom for the portrait document, or on the left for the landscape document.
This option cannot be selected if a hole punch unit is not installed.
3) Stapling
This sets whether a print job is stapled.
- Off
— Select this to print without stapling.
- Upper Left (Portrait)/Upper Right (Landscape) — Select this to staple in the upper left
for the portrait document, or in the upper right for the landscape document.
- Middle Left (Portrait)/Middle Top (Landscape) — Select this to staple double in the left
for the portrait document, or in the top for the landscape document.
- Lower Left (Portrait)/Upper Left (Landscape) — Select this to staple in the lower left
for the portrait document, or in the upper left for the landscape document.
- Upper Right (Portrait)/Lower Right (Landscape) — Select this to staple in the upper
right for the portrait document, or in the lower right for the landscape document.
To Next Page
Loading...
